Plumbing in Kent
Plumbers in Kent who fix it
properly the first time
— and back the work in writing
From a dripping mixer tap in Rochester to a full bathroom re-pipe in Maidstone, our gas-safe and qualified plumbers diagnose the real problem, give you a fixed price, and leave the property cleaner than they found it.
What it covers
Domestic and commercial plumbing — diagnosed, quoted and fixed in one visit where possible
Plumbing problems rarely arrive at a convenient time. A pinhole leak behind a kitchen unit, a toilet that won't stop running, a hot water cylinder that's gone cold on a Sunday evening — every one of them costs you time, money and patience. Our job is to take that whole problem off your hands quickly, calmly and at a price agreed in writing before any work begins.
We cover the full scope of residential plumbing across Kent and the surrounding counties: tap and mixer replacement, toilet repairs and re-seats, radiator swaps and bleeding, hot and cold pipework, ball valves and stop taps, outside taps, water pressure problems, washing machine and dishwasher installs, immersion heaters, unvented cylinders, and full bathroom and en-suite installations. If it carries water in or out of a property, we work on it.
Every visit starts the same way. We listen, ask the right diagnostic questions, then look at the actual system rather than guessing from symptoms. You get a clear explanation of what's wrong, what's causing it, the options to fix it, and a fixed price. Nothing is started until you've agreed.
What happens if you wait
A slow drip today is a £3,000 ceiling repair next month
Water damage is rarely linear. A weeping joint behind a wall can sit unnoticed for weeks, soaking plasterboard, joists and electrics, until the kitchen ceiling finally gives way. The cost of fixing the leak is almost always tiny compared to the cost of fixing what the leak destroyed.
Saturated joists, rotten skirting and collapsed ceilings — repairs commonly run into thousands once damp has spread.
Hidden moisture behind tiles and units feeds black mould within weeks, triggering respiratory issues for everyone in the home.
Most home insurance policies exclude 'gradual leaks'. A leak you knew about and didn't fix can void your claim entirely.
Common mistakes we fix every week
- Tightening a leaking compression fitting until the olive splits and the leak becomes a flood.
- Using silicone or tape as a permanent fix on a pressurised joint.
- Ignoring brown patches on ceilings because 'it dried out'.
- Buying replacement taps online before checking the existing pipe centres and isolation valves.
- Letting an unqualified handyman touch gas-safe components or unvented cylinders.
- Turning the boiler pressure up repeatedly instead of finding the leak that's dropping it.
Our process
A predictable, step-by-step system — no surprises, no upsells
- STEP 01Call or request
Speak to a real engineer — no call centre, no scripts, no chasing for a call-back.
- STEP 02Same-day attendance
Where possible we attend the same day, with a fully stocked van so most jobs finish in one visit.
- STEP 03Diagnose & price
We isolate the actual cause, show you what's wrong, and quote a fixed price in writing before starting.
- STEP 04Fix it cleanly
Dust sheets down, tools out, work done to WRAS and Water Regs standards by qualified engineers.
- STEP 05Test & guarantee
Pressure-test, demonstrate, tidy, and back the work with a 12-month written workmanship guarantee.
What you get
Concrete outcomes — not vague promises
Quoted before we start. No hourly creep, no surprise extras at the door.
Most domestic faults are diagnosed and fixed in a single visit with stock carried on every van.
Gas-safe, WRAS-aware, unvented-qualified — your home is not a training ground.
Dust sheets, shoe covers, vacuumed work area. Nobody should be able to tell we were there.
If another firm has over-quoted, we'll happily review the job and give you a straight answer.
12-month workmanship guarantee on every job, with photographs of completed work on file.
Technical detail
What proper domestic plumbing actually looks like in a 2026 Kent home
The plumbing in most Kent homes is a patchwork of decades — Victorian lead replaced with copper in the 70s, copper joined to plastic push-fit in the 2000s, and modern unvented cylinders bolted onto pipework never sized for them. Knowing how to read that history is the difference between a 20-minute fix and a 20-year problem.
Pipework materials we work with
We routinely work with copper (15mm, 22mm, 28mm), Hep2O and Speedfit push-fit, MLCP (multilayer composite), and where necessary lead replacement for older Medway and Maidstone properties. Each material has its place — and importantly, its limits. Push-fit behind a tiled wall is a call-out waiting to happen; soldered copper in a loft with no insulation is asking to freeze. We choose materials to match the location, not the price.
- Soldered and end-feed copper for concealed and high-temperature runs
- Push-fit fittings for accessible, serviceable joints
- MLCP for long underfloor runs and continental-style installs
- Full lead replacement and notification to the water board where required
Bathrooms, kitchens and utility installations
A bathroom is plumbing, electrics, tiling, carpentry and waterproofing in the smallest room in the house. We project-manage the whole job — strip-out, first fix, plastering, tiling, second fix, and final commissioning — or work as the plumber alongside your existing trades. Wet rooms, walk-in showers, freestanding baths, vanity units and concealed cisterns are all daily work for our team.
Hot water systems — vented, unvented and combi
Choosing the wrong hot water system is one of the most expensive mistakes a homeowner can make. A combi boiler in a five-bed family home will leave somebody in a cold shower every morning. An unvented cylinder on a poor incoming main will trickle. We size hot water systems to the property and how the family actually uses it, then commission them properly — which on an unvented system is a G3 notifiable job and not optional.
Residential vs commercial differences
Commercial plumbing in Kent — cafés, salons, dental practices, small offices — sits under tighter regulation, particularly around backflow prevention, grease management and legionella control. We hold the qualifications and insurance to work on Category 3 and 5 fluid risk systems, fit RPZ valves where required, and document everything for your environmental health file.
Frequently asked
Straight answers to the questions Kent homeowners ask us most
How much does a plumber in Kent cost?+
Our minimum domestic call-out covers the first hour on-site and includes diagnosis and minor repairs. Larger jobs are quoted as a fixed price after diagnosis — never hourly. You'll know the full cost in writing before we start, with no surprises on the invoice.
Do you offer emergency plumbing 24/7?+
Yes. We answer the phone outside normal hours for genuine emergencies — burst pipes, uncontrolled leaks, no heat in winter, blocked-only toilet in a single-bathroom home. We're typically on-site within 60 minutes across Kent and Medway.
How quickly can you attend a non-urgent job?+
Most non-urgent work is booked within 48 to 72 hours. For larger projects like bathroom refits, we'll usually be on-site for the survey within a week.
Are you gas-safe registered?+
Yes. Every engineer working on gas appliances is gas-safe registered. We'll happily show you the card before any work begins, and our registration number is on every quote and invoice.
What guarantee do you offer on plumbing work?+
Every job carries a 12-month written workmanship guarantee. Manufacturer warranties on parts and appliances are passed through in full — we'll register them on your behalf where required.
Can you work on unvented hot water cylinders?+
Yes. We're G3 qualified to install, service and decommission unvented cylinders, including the annual safety inspection many home insurers and product warranties require.
Will you tidy up after the job?+
Always. Dust sheets, shoe covers and a vacuum come with every van. We clean as we go and do a final walk-around with you before leaving. If there's a complaint about the finish, we come back the same week.
Do you work in older period properties?+
Yes — a lot of our work is in pre-war homes across Rochester, Chatham, Maidstone and Tunbridge Wells. We carry the tools and parts to work alongside lead, imperial copper and original cast iron without making things worse.
What areas do you cover for plumbing?+
Kent is our home patch, with the majority of work in Medway, Maidstone, Tunbridge Wells and Sevenoaks. We also cover South-East London, Sussex, Essex, Surrey, Hampshire, Hertfordshire and Berkshire for larger or pre-booked projects.
Do you give free quotes?+
Yes for installation work like bathrooms, boiler swaps and re-pipes — we'll attend, survey and quote at no charge. For diagnostic work like 'find my leak', the first hour on-site is chargeable and credited against the repair if you accept the quote.
Related services
Get it diagnosed today. Get it fixed properly.
Tell us what's going wrong and we'll be back in touch within the hour with a same-day visit where possible — and a fixed price before any work starts.
Fully insured · Workmanship guarantee · 7 days a week